Use and Care Manual

How To Empty The Dust Container
The only maintenance your power unit canister requires is
emptying of the dust container as required and periodic
cleaning of the filter. For best performance we recommend the
dust container be emptied when or before it is ½ full.
1. Ensure that the power unit is not running before emptying
the dust container.
2. Remove the dust container from the power unit (as
shown in figure 4).
3. Dispose of the dirt in the dust container.
4. Re-attach the dust container to the power unit.
Step 5 – Make sure your filters are in place inside the vacuum
cleaner and attach the dirt basin to the vacuum. Before
attaching dirt basin make sure no parts are located inside it.
Install the dirt basin so that the view plate is facing the user so
the user can visibly know when it is full of dirt.
Step 6 – Using proper lifting techniques lift up your central
vacuum and lock it on place onto the wall plate you installed in
Step 3. Below is a picture of an suggestion of how you may
8 5