SDS

CETOL SRD RE NATURAL OAK SIK250-005
Product name
2.01
Product code
Date of issue
Version
00366007
25 January 2015
No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Shut off all ignition sources. No
flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put
on appropriate personal protective equipment (see Section 8).
Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Use spark-proof tools and explosion-proof equipment. Prevent entry into
sewers, water courses, basements or confined areas. Wash spillages into an effluent
treatment plant or proceed as follows. Contain and collect spillage with non-combustible,
absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in
container for disposal according to local regulations (see Section 13). Dispose of via a
licensed waste disposal contractor. Contaminated absorbent material may pose the
same hazard as the spilled product. Note: see Section 1 for emergency contact
information and Section 13 for waste disposal.
Environmental precautions
Accidental release measures
:
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Personal precautions
:
Large spill
:
6 .
Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Dilute with water and mop up if water-soluble or absorb with
an inert dry material and place in an appropriate waste disposal container. Dispose of
via a licensed waste disposal contractor.
Small spill
:
Store in accordance with local regulations. Store in a segregated and approved area.
Store in original container protected from direct sunlight in a dry, cool and well-ventilated
area, away from incompatible materials (see Section 10) and food and drink. Eliminate
all ignition sources. Separate from oxidizing materials. Keep container tightly closed
and sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabeled containers.
Use appropriate containment to avoid environmental contamination. Do not store above
the following temperature: 120F / 49C.
Materials such as cleaning rags, paper wipes and protective clothing, which are
contaminated with the product may spontaneously self-ignite. To avoid the risks of fires,
all contaminated materials should be placed in a metal container filled with water and
sealed. Contaminated materials should be removed from the workplace at the end of
each working day and be stored outside. Put on appropriate personal protective
equipment (see Section 8). Eating, drinking and smoking should be prohibited in areas
where this material is handled, stored and processed. Ingestion of product or cured
coating may be harmful. Do not swallow. Do not get in eyes or on skin or clothing.
Avoid breathing vapor or mist. Use only with adequate ventilation. Wear appropriate
respirator when ventilation is inadequate. Do not enter storage areas and confined
spaces unless adequately ventilated. Keep in the original container or an approved
alternative made from a compatible material, kept tightly closed when not in use. Store
and use away from heat, sparks, open flame or any other ignition source. Use
explosion-proof electrical (ventilating, lighting and material handling) equipment. Use
non-sparking tools. Take precautionary measures against electrostatic discharges.
Vapors are heavier than air and may spread along floors. To avoid fire or explosion,
dissipate static electricity during transfer by grounding and bonding containers and
equipment before transferring material. Empty containers retain product residue and
can be hazardous. Do not reuse container. If this material is part of a multiple
component system, read the Material Safety Data Sheet(s) for the other component or
components before blending as the resulting mixture may have the hazards of all of its
parts.
Handling and storage
Handling
Storage
:
:
7 .
Page: 3/9
Canada - Mexico