Instructions

ManualsBrandsProma ManualsElectromechanicsUV Exposure Unit with Vacuum 260W

¢ ¢

Fully metal housing out of anodised aluminum Electronic ballast according EN60929, EN-EC 03, EI=A2,

profiles and plates. no stroboscopic effect, no flicker, power factor >0,92

Grindet glass plate with high UV transparency for

UV-A wave length

Special flourescent lamps (ACTINIC), wave length

350 - 400nm (UV-A)

Evenly illumination all of the exposure area

Constant contact pressure between 22mm cellular

material in lid and glass plate.

Electronic timer with selectable time ranges

1-600seconds, or 1-100minutes, 1-knob operation,

seven-segment LED display

Subject to technical modifications without prior notice.

...for expose UV-ligth sensitive foils and plates

Vacuum UV-Exposure Box

Vaccum UV Exposure Boxes shall used for exposure foto sensitive materials such as base

materials, printed plates, front plates or foto sensitive films.

Using the devices is very easy and user-friendly. The oscillator-based electronic timer allows the

precise adjustment of the exposure time, only with 1-knob operation (mode, time, Start/Stop). The

seven-segment LED display is showing the adjusted time and while the device is active the

remaining time.

The device integrates high intensive lamps (ACTINIC) and ensures by this short exposure time and

good contrast.

Vaccum UV Exposure Boxes are designed for using in dry rooms, schools, living rooms, office, as

well in laboratory and small factories

www.gie-tec.de

gie - tec

Item no.:

Mounting area

Technical Data

Power consumption

Number of UV tubes

UV wave length

Timer

Dimension (LxBxH)

140001 140002 140010 140020

360 x 230 520 x 390

135 W 260 W 225 W 440 W

4x 15 W 8x 15 W 6x 20W 12x 20 W

365 nm

475 x 425 x 140 625 x 605 x 140

1 ... 600 s / 1 ... 100 min

Gie-Tec GmbH An der Schlierbach 18 D-36132 Eiterfeld Tel.: +49 (0)6672/919-910 E-Mail:info@gie-tec.de

Summary of content (4 pages)

PAGE 1
gie - tec Vacuum UV-Exposure Box ...for expose UV-ligth sensitive foils and plates Vaccum UV Exposure Boxes shall used for exposure foto sensitive materials such as base materials, printed plates, front plates or foto sensitive films. Using the devices is very easy and user-friendly. The oscillator-based electronic timer allows the precise adjustment of the exposure time, only with 1-knob operation (mode, time, Start/Stop).
PAGE 2
gie - tec 1. Starting up 1.1 Placement ATTENTION! DANGER! l The UV Exposure Box is suited for ligth exposure of fotosensitiv coated materials, such as fotopositive coated base material, Cobritherm, front plates and films for making printed plates. Other usings are not allowed. l The device is designed for power supply 230V (50- 60Hz) and may used only in perfect technical condition. Using the Exposure Box it´s not allowed by children and people which are not instructed.
PAGE 3
gie - tec List of spare parts: Part no.: 140904 0625 Part no.: 140901 0001 Part no.: 410017 PVC-foil Rubber frame (450x270mm) UV lamp (ACTINIC), 230V/15W 1.4 Operating instruction for electronic timer The built-in electronic timer, is used for adjust the exposure time of the device. Time setting is possible in SecondMode or MinuteMode. Switching on the device, the timer is working in “SecondMode”. Thereby the ON-time can be adjusted between 1 sec and 9min50sec.
PAGE 4
gie - tec Information of Safety and Risc: 2. Declaration of Conformity Safety: Declaration of Conformity of Exposure Boxes according EC-Directive 2006/95/EG UV Don´t start exposure before lid of exposure box is closed. Manufacturer: Gie-Tec GmbH An der Schlierbach 18 36132 Eiterfeld Radiation from UV lamps is harmful to eyes and skin Description and Identification of Device: Vakuum UV Exposure Box Art. Nr.