User Manual

ManualsBrandsProMariner ManualsPower suppliersProMar1

For factory service please call: 800.824.0524 or visit www.promariner.com

IMPORTANT NOTICE

Please save and read all safety, operating and installation instructions before installing

or applying AC power to your on-board battery charger.

09/12 A

specifications subject to change without notice

For use with Flooded (Lead-Acid) or Gel Batteries. Not for use with AGM (Absorbed Glass Matt) or 4D or 8D large capacity batteries

RECREATIONAL SERIES

Mariner

Pro

ProMar

Fully Automatic Charging Inside

Marine Battery Charger

Professional Mariner, LLC

PO. Box 968

Rye, New Hampshire 03870

TEL: 603-433-4440

FAX: 603-433-4442

www.promariner.com

Made in Taiwan

Mariner

Visit ProMariner online at www.promariner.com, for a complete

selection of quality marine products...

Here are just a few:

ProMar1 Series - Recreational Grade Waterproof Marine Battery Chargers

ProSport Series - Heavy Duty Recreational Grade Marine Battery Chargers

ProTournament Series - Professional Grade Tournament Grade Marine Battery Chargers

ProIsoCharge Series - Digitally Controlled Zero Loss Charging Isolators

Digital Mobile Charge In-Transit Chargers

Battery Maintainers

AC Plug Holders

Battery Isolators

Isolation Transformers

Galvanic Isolators and Monitored Systems

Corrosion Control Products

Waterproof Marine Binoculars

Gold Plated Fuses and Holders

A Complete Line of Hand Held Test Meters

Online Technical Support and Service Support

Visit frequently, we are always adding new products for your

boating enjoyment!

SALTWATER

WATERPROOF &

TESTED

100%

Design and Constructed to:

Marine UL 1236 SB

CSA C22.2 No. 107.2

FCC Class A

ABYC A-28

Owner's Manual and Installation Guide

5/5/3 31413 12/24/+ENG 13 3 1156’ 9” x 5.25” x 2”

5/5 31410 12/24 10 2 1156’ 9” x 5.25” x 2”

Model Part No.

Volts

Amps Banks AC In

Cables

Size

5 31405 12 5 1 1156’ 5.75” x 3.5” x 2”

5/3 (OEM only) 31408 12/24 8 2 1156’ 5.75” x 3.5” x 2”

Summary of content (11 pages)

PAGE 1
ProMa r i ne r ProMa r i ne r TM Visit ProMariner online at www.promariner.com, for a complete selection of quality marine products...
PAGE 2
TA B L E O F C O N T E N T S Safety Instructions..........................................................................pages 1-2 General Overview...........................................................................pages 3-5 Installation Guidelines.....................................................................pages 5-7 Wiring Diagrams...........................................................................pages 8-12 Charging Your Batteries....................................................
PAGE 3
SAFETY SAFETY 1 2 General Safety General Safety Before connecting your batteries or applying AC power, read all instructions and cautionary markings on the battery charger, cables, and batteries. CAUTION - To reduce the risk of injury, charge only Lead-acid type rechargeable batteries; Flooded (Lead-acid), Sealed (Lead-acid) and Gel (Gelled Electrolyte Lead-acid). Other types of batteries may burst, causing personal injury.
PAGE 4
OVERVIEW OVERVIEW 4 3 General Overview The ProMar1 Battery Charger is a fully Automatic/ Electronic On-board Marine Battery Charger. The unit is prewired for easy installation and is 100% waterproof for fresh and salt water applications. The ProMar1 charger incorporates a durable one piece plastic housing. The unit offers fully automatic charging which includes a "Float " maintenance mode that is safe for long and short term storage.
PAGE 5
OVERVIEW I N S TA L L AT I O N 5 6 Fully Automatic Charging Overview Continued Installation Continued ProMar1 Float / Maintenance - Blue and Green LED Only On vinyl or varnished areas. Be sure to place the ProMar1 Battery Charger in an accessible area where all indicators are viewable. Confirm all battery cables can reach each of the batteries.
PAGE 6
I N S TA L L AT I O N I N S TA L L AT I O N 7 Installation Continued 7. Run your cables free from sharp objects and hold each of them in place with cable ties. Coil excess cable, do not cut or shorten the length of the cables as there are in-line fuses located 4 inches from the end of each positive (red) cable. These fuses are in place to protect the charger and output cables in the event of a short or reverse polarity. 8. Connect the DC output cables as illustrated on page 8.
PAGE 7
I N S TA L L AT I O N I N S TA L L AT I O N 9 10 ProMar1 Wiring Diagrams ProMar1 Wiring Diagrams Single Output Charger for 1 12V Battery Dual Output Charger for 2 12V Batteries Dedicated 12 VDC Trolling Motor or Engine Battery Configuration 12 VDC Trolling Motor + Engine Crank Battery Configuration with (2) 12 VDC Batteries Note: Indicates Jumper Series Note: Indicates Jumper Series Indicates Fuse Indicates Fuse AC power Output 2 Output 1 ProMar1 5/3 & 5/5 AC power Output 1 ProMar1 5 Cabl
PAGE 8
I N S TA L L AT I O N I N S TA L L AT I O N 11 12 ProMar1 Wiring Diagrams ProMar1 Wiring Diagrams Dual Output Charger for 2 12V Batteries Triple Output Charger for 3 12V Batteries Dedicated 24 VDC Trolling Motor Battery Configuration with (2) 12 VDC Batteries Connected with a Series Jumper 24 VDC Trolling Motor Battery Configuration with (2) 12 VDC Batteries Connected with a Series Jumper Plus Dedicated 12 VDC Engine Start Battery Note: Indicates Jumper Series Note: Indicates Jumper Series Indica
PAGE 9
CHARGING MAINTENANCE 13 Charging Batteries 14 Owner's Periodic Maintenance Guide The ProMar1 Battery Charger is designed to charge and maintain your batteries. Please follow these steps each time you use your ProMar1 charger: Item: Battery Connections 1. Open all battery compartments and ventilate for at least 15 minutes before applying AC power to your charger. While charging your batteries make sure to keep your battery compartment open allowing for free air ventilation.
PAGE 10
TROUBLESHOOTING WA R R A N T Y 16 15 Trouble Shooting Guide No Blue, Red or Green LED Indicators Check for loss of AC power at the 120VAC outlet. Confirm GFCI (Ground Fault Circuit Interrupt) outlet has not tripped. Check with a meter or 120VAC test light that AC is present at the end or your extension cord. Confirm all charger cables are installed with the correct polarity connections at each battery and that all connections are clean and tight.
PAGE 11
SELECTOR GUIDE ACCESSORIES 17 18 3 ProMar1 Marine Battery Charger Models to Choose From... Accessories 5 Amp Single Bank ProSport 1.5 Battery Maintainers Max. Batteries: 1 12V Ideal Use: Single 12V engine crank battery or Single 12V trolling motor battery DC Output: Single 12V output at 5 Amps Max. AC Input: 115 VAC / 60Hz Cable Length 6’ AC and DC Model: 31405 Fully automatic, with built-in safety.