User Manual

ManualsBrandsProMariner ManualsPower suppliersProSport - SMT

Distributed-On-Demand

™

Charging

Pro

ariner

™

Owner's Manual and Installation Guide

Fully Automatic / Electronic Multi-Stage Marine Battery Chargers

Pro

ariner

™

IMPORTANT NOTICE

Please save and read all safety, operating and installation instructions before installing

or applying AC power to your ProMariner ProSport On-Board Marine Battery Charger.

Constructed to:

Marine UL 1236

FCC Class A Part 15

SALTW ATER

TESTED

WA TERPROOF

and

Total Amps Use with # Battery

Models Part No. Bank Config. Distributed of Batteries System

ProSport6 42006 Single 6 Amps 1 12 VDC

ProSport8 42008 Dual 8 Amps 2 12/24 VDC

ProSport12 42012 Dual 12 Amps 2 12/24 VDC

ProSport20 42020 Dual 20 Amps 2 12/24 VDC

ProSport20 Plus 42021 Triple 20 Amps 3 12/24/36 VDC

06/10 E SMT-Digital

specifications subject to change without notice

Please visit our website at www.promariner.com for any warranty, service or installation assistance

and FAQ's or call our Customer Care Department at 800-824-0524 from 8:30 am to 5pm (Eastern Time).

Your Satisfaction is Important to Us!

Do not return this product to your local retail location. Please call ProMariner at the number

below for any service or warranty requirements.

TWO YEAR

WARRANTY

Professional Mariner, LLC

200 International Drive, STE 195

Portsmouth, New Hampshire 03801

TEL: 603-433-4440

FAX: 603-433-4442

www.promariner.com

Model Number: Serial Number: Date of Purchase:

PLEASE RECORD YOUR:

Pro

Sport

Heavy Duty Recreational Grade On-Board Marine Battery Charger

(Serial number can be located on the top side of the mounting flange.)

Series

SMT-DIGITAL

Summary of content (14 pages)

PAGE 1
ProMa r i ne r ProMa r i ne r ™ ™ SMT-DIGITAL ProSport Series Heavy Duty Recreational Grade On-Board Marine Battery Charger Owner's Manual and Installation Guide WATERPROOF SALTWATER and TESTED TWO YEAR Constructed to: Marine UL 1236 FCC Class A Part 15 WARRANTY D i s t r i b u t e d - O n - D e m a n d™ C h a r g i n g Fully Automatic / Electronic Multi-Stage Marine Battery Chargers Models Part No.
PAGE 2
ProMa r i ne r ™ Safety Instructions 1 General Safety Instructions Table Of Contents Safety Instructions... pages 1-2 ProSport Overview... pages 3-6 Selecting a Charging Profile & Understanding Battery Types Installation Guidelines... page 7 pages 7-9 4 Steps to Wire your ProSport Charger Correctly DC Wiring Diagrams page 10 pages 11-18 Before connecting your batteries or applying AC power, read all instructions and cautionary markings on the battery charger, cables, and batteries.
PAGE 3
ProSport Overview Safety Instructions 2 3 Personal Safety Precautions Continued General Overview e) NEVER smoke or allow a spark or flame in the vicinity of a battery or engine. CAUTION - To reduce the risk of injury, charge only Lead-acid type rechargeable batteries; Flooded (Lead-acid), Sealed (Lead-acid), GEL (Gelled Electrolyte Lead-acid) and AGM (Absorbed Glass Mat). Other types of batteries may burst, causing personal injury.
PAGE 4
ProSport Overview ProSport Overview 4 5 Distributed-On-Demand™ Charging Versus Standard Chargers. General Operation ProSport's "Distributed-On-Demand™" feature will automatically distribute 100% of its available charging amps to any one battery or combination of all batteries. This feature ensures all available charging amps are used, unlike other 2 and 3 bank On-Board Chargers with a fixed amp limit per charger bank / DC output cable.
PAGE 5
Selecting a Charging Profile & Understand Battery Types ProSport Overview 7 6 Sequential Multi-Stage Charging Overview Selecting a Charging Profile & Understanding Battery Types Upon applying AC power to your ProSport On-Board Marine Battery Charger, the following will be observed (all LEDs will flash as a self test): Your Battery Charger is equipped with a user programmable battery type selector that is factory set for standard Flooded (Lead-acid) / AGM (Absorbed Glass Mat) batteries.
PAGE 6
Installation Guidelines Installation Guidelines 8 9 Installation (Continued) Installation (Continued) of clear unobstructed space around and in front of the ProSport On-Board Marine Battery Charger. Open all battery and engine compartments and ventilate for at least 15 minutes before starting the installation of the ProSport Charger. 2. Confirm the selected mounting location allows for a minimum of 8 inches of free space around front and sides of the ProSport charger.
PAGE 7
Installation Guidelines Installation Guidelines 11 10 4 Steps to Wire your ProSport Charger Correctly ProSport Series Typical Installation Wiring Diagrams Step 1: Simply choose the illustration that has the same number of charger output bank cables as your ProSport Battery Charger in hand and wire exactly as shown (choose the illustration that matches your application) for proper charger operation.
PAGE 8
Installation Guidelines Installation Guidelines 13 12 ProSport Series Typical Installation Wiring Diagrams ProSport Series Typical Installation Wiring Diagrams Note: Incorrect wiring will result in reverse polarity or high reverse voltage, in the event this happens, the ProSport Charger has been designed to not fail as a result, however it will cause the charger to "internally disconnect" and provide "no output" until the (reverse polarity) caused by putting the "Red" + lead on a - negative battery te
PAGE 9
Installation Guidelines Installation Guidelines 15 14 ProSport Series Typical Installation Wiring Diagrams ProSport Series Typical Installation Wiring Diagrams Note: Incorrect wiring will result in reverse polarity or high reverse voltage, in the event this happens, the ProSport Charger has been designed to not fail as a result, however it will cause the charger to "internally disconnect" and provide "no output" until the (reverse polarity) caused by putting the "Red" + lead on a - negative battery te
PAGE 10
Installation Guidelines Installation Guidelines 17 16 ProSport Series Typical Installation Wiring Diagrams ProSport Series Typical Installation Wiring Diagrams Note: Incorrect wiring will result in reverse polarity or high reverse voltage, in the event this happens, the ProSport Charger has been designed to not fail as a result, however it will cause the charger to "internally disconnect" and provide "no output" until the (reverse polarity) caused by putting the "Red" + lead on a - negative battery te
PAGE 11
C h a r g i n g Yo u r B a t t e r i e s Installation Guidelines 18 19 ProSport Series Typical Installation Wiring Diagrams Charging Batteries Note: Incorrect wiring will result in reverse polarity or high reverse voltage, in the event this happens, the ProSport Charger has been designed to not fail as a result, however it will cause the charger to "internally disconnect" and provide "no output" until the (reverse polarity) caused by putting the "Red" + lead on a - negative battery terminal) and/or the
PAGE 12
Tr o u b l e s h o o t i n g Maintenance 21 20 Important Notice: FCC Class A Part 15 Notification. Your ProSport On-Board Marine Battery Charger has been designed and tested to comply with FCC Class A part 15. These regulations are to provide adequate protection against harmful interference while operated in a commercial application.
PAGE 13
Specifications & Accessories Customer Service & Warranty 22 TWO YEAR 23 WARRANTY Customer Service & Warranty Specifications Model Bank Config ProSport 6 ProSport 8 ProSport12 ProSport 20 ProSport 20 Plus ProSport 1.5 Portable ProSport 1.5 On-Board single dual dual dual triple single single Total Amps Distributed 6 8 12 20 20 1.5 1.
PAGE 14
ProMa r i ne r ProMa r i ne r Visit ProMariner Online at www.promariner.com, for a Complete Selection of Quality Marine Products...