Specifications
3M
1WP
a
o
111
Alp
161
PAINT & FIBERGLASS REPAIR
For more information see www.3m.com/marine
3M™ MINI LID & LINER DISPENSER
Wall mounted dispenser which is designed to hold at least
50 3M™ PPS™ Mini lids and liners. Easy loading from top
with easy access to a new lid and liner. Keeps lids and liners
clean, organized and safe from outside contamination.
ORDER NO. 619-16098
Mfr. No. 16098
3M™ ACCUSPRAY™ HGP SPRAY GUN KIT
An HVLP gravity pressured spray gun, to be used with a pressurized
H/O cup system to provide superior application of high viscosity coatings.
Complete Kit Includes:
(1) HGP Spray Gun
(1) Air Flow Valve
(4) Atomizing Heads – 2 each 1.8mm nozzles & 2 each 2.0mm nozzles
Now you can spray those high viscosity coatings such as gelcoats, bottom paints, extremely heavy bodied primers
and adhesives. Virtually any sprayable coating. The innovative 3M™ Accuspray™ System with its replaceable
atomizing head, in conjunction with the 3M™ PPS™ Pressure cup allows for the following benefits:
Boosts Productivity Maximizes Benefits of the 3M™ PPS™ System
•
Lowers application time
•
Reduces spray gun cleaning time
•
High delivery rates
•
Uses less solvent for clean up
•
Eliminates costly gun maintenance
•
Decreases hazardous waste disposal cost
•
Builds mil thickness quickly
Reduces Coating Consumption
•
Minimizes overspray
•
Reduces coating waste
3M™ ACCUSPRAY™ ATOMIZING HEAD
REFILL KIT 2.0mm
Kit Includes: 4 Nozzles
Replaceable atomizing heads for use with
the 3M™ Accuspray™ HGP Spray System
(619-16587).
ORDER NO. 619-16609
Mfr. No. 16609 4-Pack
3M™ ACCUSPRAY™ FLUID NEEDLE
Replaceable fluid needle.
ORDER NO. 619-16571
Mfr. No. 16571
3M™ ACCUSPRAY™ AIR FLOW
CONTROL VALVE
For use with the 3M™ Accuspray™ Spray
Gun. Gauge face is colour-coded to indicate
appropriate air pressure settings.
ORDER NO. 616-16573
Mfr. No. 16573
3M™ PPS™ TYPE H/O PRESSURE CUPS
This product is intended for use in place of metal cups on most pressure
cup guns. Setting up the pressure cup vs. standard PPS™ is connecting
the pressure hose to the cup port to the pressure port on the spray gun, or
spray gun regulator. For use with the 3M™ HGP Spray Gun kit
MINI H/O PRESSURE CUP
ORDER NO. 616-16121
Mfr. No. 16121 6 ounce (177 ml)
LARGE H/O PRESSURE CUP
ORDER NO. 616-16124
Mfr. No. 16124 28 ounce (828 ml)
3M™ PPS™ LARGE
FILTERS/LIDS LINERS
Kit Includes:
(25) Disposable Lids with 200 micron filters
(25) Disposable Liners, (10) Sealing plugs
•
Graduated measurement to 28 oz/840ml
(with generic mix ratio film insert). Max capacity of 32 fl. oz.
For use with part number (619-16124)
ORDER NO. 616-16024 Mfr. No. 16024
3M™ ACCUSPRAY™
HG09 HVLP TEST AIR CAP
Provides the ability to test the
3M™ Accuspray™ Spray Gun System.
ORDER NO. 616-16572
Mfr. No. 16572
3M™ ACCUSPRAY™ ATOMIZING
HEAD REFILL KIT 1.80mm
Kit Includes: 4 Nozzles
Replaceable atomizing heads for use with
the 3M™ Accuspray™ HGP Spray Gun System
(619-16587).
ORDER NO. 619-30729
Mfr. No. 16611 4-Pack
Pressurized
Gravity Feed
for
High viscosity
Coatings
Technical Data
Weight 11.4
Operating Pressure (Full Trigger)
15 psi max
Operating Pressure (First stage) 25 psi max
Air Consumption
10 cfm
3M™ PPS™ MINI
FILTERS/LIDS LINERS
Kit Includes:
(50) Disposable Lids with 200 micron filters
(50) Disposable Liners, (20) Sealing plugs
•
Graduated measurement to 5-1/2 oz.
(with generic mix ratio film insert). Max capacity of 6 fl. oz.
For use with part number (619-16121)
ORDER NO. 619-16114 Mfr. No. 16114
ORDER NO. 619-16587
Mfr. No. 16587
ACCESSORIES FOR ACCUSPRAY™ HGP SPRAY GUN