Variable Color Temperature
Introduction The PROMASTER VARI-TEMP LED LIGHT will help you get amazing video and photos with your digital still camera or camcorder. Using a combination of daylight and yellow LEDs, this ultra-bright light has the ability to match the color temperature of most indoor lighting for a perfect blend of natural existing light and added light. The Vari-Temp LED operates off of either a rechargeable lithium battery for complete portability or A/C power for maximum shooting time.
Using the Light Your PROMASTER VARI-TEMP LED light uses a combination of daylight and 3200ยบ K super bright LEDs to adjust the color temperature of your light to the surrounding ambient light conditions. Matching the color temperature of the existing light allows you to add light to get better exposures while maintaining the natural feel of your scene. 1. Press and hold the Power/Mode button (3) for approximately 3 seconds to turn on the light.
Note: The working distance of an infrared signal can vary dramatically. Bright light, obstructions between the remote and the device, weak batteries and other factors may impact the reliability of remote operation. Charging the battery Your LED336 light includes a battery and charger. To charge the battery: 1. Align the contacts of the battery with the battery charging contacts on the charger. Gently slide the battery onto the charger until you hear a slight click. The battery will be locked into place. 2.
Cleaning 1. To clean the light, use a damp cloth. Be sure to completely dry the light after cleaning. 2. Do not use strong detergents, such as thinner, gasoline or alcohol, which could damage the protective layer of the lamp housing.
