Instruction Manual Code 1888
Part Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13 14. 15. 16. 17. 18. 19.
Understanding the LCD Panel 1. Battery Level Gauge This icon appears in the top, left corner of the LCD panel. It is designed to look like a battery. When all 3 bars are displayed inside the gauge the batteries are at full power. As the batteries are drained each bar will disappear one by one until the gauge is empty and the batteries are exhausted. 2.
Installing and Removing the Flash Diffusers 1. Rotate the diffuser counter-clockwise and gently pull to remove it. 2. Attach a new diffuser by placing it over the ring light and rotating it clockwise. 3. 4 diffusers are included with this kit. The transparent diffuser will give the most powerful and harshest light. The frosted white diffuser produces a soft light with less power. The amber diffuser matches the RL100’s light to a tungsten color temperature and creates a very warm effect.
Installing the RL100 Ring Flash on Your Camera The RL100 has two main parts – the ring flash head and the power control unit. To mount the power control unit to your camera: 1. Slide the mounting foot onto your camera’s hot shoe. 2. Secure the power control unit by rotating the locking wheel clockwise until tight.
Installing the Macro Ring Head on Your Lens This kit includes 49, 52, 55, 58, 62, 67, 72 and 77mm lens adapter rings. 1. Choose the adapter ring that matches the thread size on your lens. 2. Screw the adapter ring into the lens threads until snug. Be careful not to overtighten. 3. Squeeze the mounting ring locks on the Macro Ring Head 4. Slip the back of the Macro Ring Head over the edges of the lens mounting ring. 5. Once in place, release the locks and make sure the flash head is secure. 6.
Operating the Unit Button Name Operation Power Switch (ON/OFF) Press and hold for 3 seconds to turn the unit on or off Mode Switch Button (MODE) Press to switch between the FLASH, L and R mode Output Power Adjustment Button Press (buttons with arrows) on either side of the SET button to: Right/Increase or Left/Decrease Continuous Light/Flash Selection Button (LIGHT) Press to activate the continuous light feature. Press a second time to return to the flash mode.
Power Saving Features The LCD back-light will automatically turn off after 20 seconds of non use (use includes button pressing or flash operation.) The back-light will automatically turn on again when a button is pressed. The RL100 will enter a deep sleep mode after 30 minutes of inactivity. Press the SET button to wake it up.
ONE YEAR UNCONDITIONAL GUARANTEE If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return this product to your ProMaster dealer and it will be exchanged for you at no charge. ProMaster products are guaranteed for ONE FULL YEAR against defects in workmanship and materials. If at any time after one year, your ProMaster product fails under normal use, we invite you to return it to ProMaster for evaluation. Code 1888 www.promaster.
