Operating instructions

3
Meta
l contacts on
the memory card
Write protection
switch
Push the switch on the SD memory card to the bottom and the data will be protected.
Push the switch on the SD memory card to the top and the write protection will be
cancelled. Be sure the switch is in the unlocked position before taking video or photos.
Proper care of a memory card
 The memory card must be formatted in your camera/camcorder before use.
Failure to do this may cause loss of images.
 Turn off the camcorder before inserting or removing the memory card.
 The performance of memory cards deteriorate with use. If you notice a loss of
performance of your memory card it should be replaced.
 DO NOT bend the memory card since it is the precise electronic device.
 DO NOT store or use the memory card in the environment with strong electric
field or magnetic field, such as the place close to the loudspeaker or TV receiver.
 Use or store the memory card in extremely hot or cold environments.
 Keep the memory card clean and dry. If the memory card is exposed to liquid or
moisture, wipe the card with soft cloth.
 The memory card will become very warm after a long use, this is normal.
 Recorded data might be damaged if one of the following situations occurs:
--- Memory card is not properly formatted in the camera
--- The camera is powered off or the memory card is withdrawn during recording,
deletion (formatting) or reading.
 For long term storage, data should be copied to other media such as hard disk or
CD/DVD.