User guide

Technical Specification:
•Bluetooth™: Version 3.0
•Input power: 5V, 1A
•Output power: 2W
•Impedance: 3 Ohms
•Speaker frequency: 90-15K
•Signal-to-noise ratio: 50dB
•Charging time: 2 hours
•Playing time: 2 hours
•Battery capacity: 800mAh
•Operating distance: 10M
Battery Charging Instruction
This unit operates on a built-in Li-ion battery that can be recharged either using the USB
port on your computer or from a USB power adaptor (not included) with a rated output
of DC 5V 500mA and up.
Note: The mini USB CHARGING JACK located on this unit is only designed for charging
the built-in Li-ion battery.
Charging the Battery for First Time
1.) Charge the built-in Li-ion battery a minimum of 2 hours prior to first use.
Plug the unit into the USB port on your computer or into a USB power adaptor (not
included) using the included USB cable.
2.) The battery charging indicator flashes while charging and it stops flashing when the
unit is fully charged.
Unplug the USB cable from the power source once the battery is fully charged.
Recharging the Internal Battery
After prolonged use, the internal battery will become weak and the operation may
become intermittent. When the internal battery capacity is very low, the battery
Indicator will rapidly flash in red to alert you to recharge the internal battery as soon as
possible.
Plug the speaker into a USB port on your computer by using the included USB cable or
into a DC 5V, 500mA and up USB power adaptor (not included). Disconnect the USB
cable from the speaker as soon as it is fully charged.
3.) Button
While unit is in Bluetooth or TF card Playback mode, press once to play or pause the
current track.
•In Bluetooth mode, when receiving an incoming call on your cell phone, tap this button
once to answer the phone, press this button again or press and hold this button to end
the call or ignore the incoming call.
4.)Built-in Microphone
5.)Battery charging Indicator (Red color)
Rapid flashing =low battery
While charging :
Flashing =charging
Steady Red= full charged
6.)Aux-In Jack
7.)Mini USB Charging jack
8.)TF card slot
9.)Operating mode indicator (Red/Blue/Purple)
Blue color =Bluetooth mode
Purple color= TF card playback mode
Red=Aux-in mode
10.)Power On/Off selector
4