User guide

1.)Slide the Power ON/OFF selector on the bottom of the unit to ON position (where the
orange round mark on the selector can not been seen),a voice prompt “Power on” and a
beep sound is heard in 2-3 seconds. Meanwhile, the Operating mode indicator will flash
in blue.
2.)To turn the unit off, slide the Power ON/OFF switch to OFF
position (where the orange round mark on the selector can been seen).
If the speaker has ever been paired with a Bluetooth device before.
You need to follow the pairing instructions below to link the speaker
with your Bluetooth device .
1.)After turning on the speaker, the speaker will search for the last paired device . The
operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device ,
a beep sound is heard and operating mode indicator will keep in blue and stop flashing .
2.)After successfully pairing (linking) , you can begin playing music from your Bluetooth
device wirelessly to the speaker .
3.)Press the + / - button on the speaker to adjust to the desired volume level .
Notes:
1.)Charging time will vary if you are listening to music while charging the internal
battery. We recommend you switch off the speaker power during the charging process.
2.)To prolong the life of a rechargeable battery, it is recommended to completely
discharge it before fully charging it again .
3.)Rechargeable batteries need to be cycled for maximum performance and longer
battery life. If you don't use the player that often, be sure to recharge the battery at least
once a month in order to keep the internal battery working properly.
Using The Speaker as a Handfree Bluetooth Speakerphone
1.)Link your smartphone to the speaker via Bluetooth as described above .
2.)When receiving an incoming call on your cell phone , tap button on the speaker to
switch the incoming call from cell phone to the speaker. A short beep sound will be
heard confirming the call was answered. Complete your call using the built-in
microphone and speaker.
3.)Adjust the volume control of your cell phone to obtain the desired sound level.
OPERATING THE SPEAKER IN TF-CARD MODE
•Insert the TF card carefully to the speaker to access TF card mode, the operating mode
indicator will be changed to Purple color. The TF card will start playing automatically in
few seconds.
•Press button to pause or resume playback.
•-Press and hold the “+” or “-” button to raise up/lower the volume level.
•Short Press “+” button to skip to next track or press “-” button to the previous track.
•To remove your TF card, simply pause the playback and gently unplug it from the slot.
Remember to turn off the speaker, too.
4.)To end the call, just tap the button again, a short beep sound will be heard and the
call will end. If you were playing music from your cell phone to the speaker before
answering the call, the music will automatically resume playing when you hang up .
5.)To ignore an incoming call, simply press and hold the button on the speaker for
about 2 seconds, a beep sound will be heard and the call will be ignored .
6