reTrax Retractable Clip-On Bluetooth® Headset with Multi-Point Pairing & Out of Range Buzzer User Guide
Introduction Keep your headset wires tangle-free and in place with reTrax, the latest retractable Bluetooth® headset by Promate. With a retractable, easy to use headset, now you won’t have problems of untangling it while you’re in a hurry answering calls. You can also wear this uniquely styled headset either as a clip or as a neck strap.
Features: • • • • • • • Bluetooth® v3.0 headset with out of range buzzer Multi-point pairing to connect two Bluetooth® devices simultaneously Crystal Clear sound quality Retractable, easy to use headset Incoming call alert Wear it as a clip or as a neck strap Made from ABS plastic Compatibility: reTrax may be paired as a headset to any compatible Bluetooth® enabled devices. Precautions Please read all safety instructions and warnings thoroughly before using this product.
Appearance & Interface Description: 7 8 6 9 3 2 1 5 4 1. 2. 3. 4. 5. 6. 7. 8. 9.
Operation Instructions: 1. Charging reTrax Before using your reTrax for the first time, please insert the charger into the power source and connect the other end to Micro-USB charging socket of reTrax to charge the battery fully. Status Status Indicator Audio (Earpiece) 1. Charging Red light ON No sound 2. Fully Charged OFF No sound 3. Low Battery Red light for every 5 seconds A short beep every 20 seconds OFF No sound 4. Out of Battery Note: Use only the supplied charging cable for charging.
• Set your phone to discover ‘reTrax’ and follow the instruction • If your phone asks for a passkey or PIN code, confirm with ‘0000’ (4 zeroes). When the phone and reTrax are paired and connected, the reTrax’s status indicator will flash blue. 4. Pairing Your reTrax with Two Bluetooth® wireless technology enabled phones (Multi-point Pairing) reTrax supports a Multi-point function to allow simultaneous pairing of reTrax with two smartphones.
Function Button Audio (Headset) Audio (Speaker) Status Indicator • Reject a second call directly on the other connected phone during the call. End a Call Press Multi-‘Di Do’ tone once Blue light flashes function button once once to during a call to end the call. Voice Dialing Hold Multi-‘Do’ tone once -function button • After you hear a short beep, say the voice tag, and you must have the voice tag recorded on your smartphone.
Troubleshooting: 1. I cannot pair with my phone. • Ensure your reTrax is power on and fully charged. • Ensure the Bluetooth® setting is activated on your phone. • Ensure your reTrax is at pairing mode. (flashes blue and red alternately) • Ensure your reTrax is not out of range of your phone. If the above steps do not solve the problem, please turn off your reTrax and recharge it, and then try again. 2. I cannot hear the sound in my headset. • Ensure your reTrax is power on and fully charged.