Spire Dual Pairing “Shake n Shuffle” Bluetooth®/NFC Speaker User Guide
Introduction Tune into your groovy side with Spire, a multi-point paring wireless speaker with a beat indicator that packs a massive audio punch. Unlike forward-facing speakers that only send sound in one direction, Spire produces an omnidirectional sound output that fills your surroundings in every direction evenly. Enhance this wonderful sound experience and never miss a beat with our specialized beat indicator LED’s built into Spire that let you see and feel the beat.
Features: • Pair two Bluetooth® devices at the same time • NFC for quick pairing • Shake to skip to previous or next song • Tilt over to mute audio • Built-in beat indicator LED’s • Sensitive Touch key control • Auxiliary port and Micro-SD card reader Playback support • Hands-free support • 4-5 Hour playback Precautions: Please read all safety instructions and warnings thoroughly before using this product. Improper use of this product may result in damage to this or attached products.
Appearance & Interface Description: 1 10 2 3 5 4 Spire 5 7 6 1. Mode Button 2. Toggle Backward Button 3. Toggle Forward Button 4. NFC Sensing area 5. Multifunction Button 7 8 9 6. Power Switch / Lock Switch 7. Auxiliary Port 8. Micro-SD/TF card reader 9. USB Charging Port 10.
Operation Instructions: 1. Charging Spire • Plug the USB Charging cable into the Base portion of Spire. • Plug the other end of the USB cable into a wall power socket or computer USB port. • The red indicator on Spire will begin blinking. • When the battery is fully charged, the red indicator will turn off and the blue indicator will turn on. It takes approximately 5 hours to fully charge Spire. Note: Before using Spire for the first time charge it fully.
5. Pairing Spire (Using NFC) You are required to pair Spire with your mobile phone once before using it. • Switch on Spire and tap your NFC enabled smartphone on Spire. • Your smartphone will then ask you whether you want to pair this Bluetooth® device. • Select “Yes” and Spire will then be connected to your smartphone. 6. Pairing Spire with a second Bluetooth® device(Multipoint Pairing) : • Follow the above instructions to pair the Spire with the first device.
9. Make and receive calls Once Spire is successfully paired and connected with your mobile phone, you can use it to make and receive calls. Spire can be used with voice dialing if your phone supports the feature. Please consult your phone’s manual for more information. • Using the phone keys to make a call: Dial a number on the phone as you normally do. Once the call has been set up, the sound will be transmitted to Spire automatically.