PRO-STIX (42mm Series) Carbon Fiber Tripod Instruction Manual #TR423 / #TR424 / #TR424L
FEATURES AT A GLANCE Our ProMediaGear Pro-Stix, “42mm Series” Tripods, are made with 10x Layer carbon fiber, hard anodized 6061-T6 Aluminum, and Stainless Steel components. Made in the USA. 1. MOUNTING STUD 3/8-16 Mounting Stud securely attaches to tripod head. 2. SPIRIT LEVEL Bubble level incorporated into the Apex to level your tripod with ease on uneven terrain. 3. ANGLE STOP 3-Position stops with built-in finger push area that allows for quick leg adjustments for any shooting situation. 4.
HEAD MOUNTING To install a Ball Head, Video Head or Gimbal of your choice first locate the 3/8-16 screw on the top of the removable tripod plate. Next, match up your accessory and insert it over the screw. Tighten your accessory in a clockwise fashion until it becomes snug. In some cases it may be necessary to tighten your pan knob then tighten a little more. You may also remove the “42 Series” Top Plate if you feel it is easier for you, however not necessary.
WELCOME: Thank you for making ProMediaGear your choice for professional photographic equipment. ProMediaGear is manufactured to provide years of dependable service. WARRANTY: All ProMediaGear Pro-Stix Series Tripods are guaranteed to the original purchaser to be free of defects in material and workmanship for five (5) years from the date of purchase.
