User's Guide

ACTIVslateXR User Guide
5
Operation of the RF ACTIVslate
Power On/Off Button
To switch the ACTIVslate on, press and hold the Power On/Off Button. Release
the button when you hear the ACTIVslate beep. After approximately 1 second,
the Promethean logo will appear on the LCD.
To switch the ACTIVslate off, press and hold the same button until the
termination message ACTIVslate Shutting Down appears on the LCD Screen.
Note: To save battery power, the ACTIVslate will automatically switch off after
three minutes of inactivity. To change this time, refer to ‘Menu ’.
Register Button
The Register Button is used in the ACTIVslate registration process. Press the
ACTIVpen in the middle of the Register Button to select it.
Refer to the ACTIVslate Quick Start Guide for information about the Registration
process.
Mode Boxes
The six round mode boxes situated in a row above the drawing surface are used
to enter the pin number when registering the ACTIVslate with the software. The
mode boxes can only be selected by the ACTIVpen. Press the ACTIVpen in the
middle of the mode box to select it.
LCD Screen
Power On/Off Button
Register Button
Charging socket
ACTIVpen holder
Mode boxes
Drawing Area