User's Guide

ACTIVote User Guide
8
Adding Further Devices
It possible at any time to return to the Device Registration program and click
once more on the Register button. Follow the procedure outlined above to add
more devices to the list.
Removing Devices
It is possible to remove selected devices or all devices from the list. To remove
all devices click on the Remove All button. To remove selected devices simply
highlight the devices you wish to remove and click the Remove button.
Battery Low Warning
When you register a device, the software interrogates each device to ascertain
the power level of the batteries powering the device. If a device reports back
that the batteries are low then the software will display a warning:
If this occurs you are recommended to physically remove the device from use
until the batteries have been replaced. In addition remove the registration
information for that particular device by selecting the device name in the list
and clicking on the Remove button.
Please refer to the Device Maintenance section for further details on battery
replacement.
Exiting the Device Registration Program
Click onto the OK button
The device registration file will be recorded.
If you try to exit the device registration program by clicking the Cancel button,
you will be prompted to save the registration information.
Choose Yes to record the registration information. The program will now close
and the ACTIVote devices are ready for anonymous mode. If you do not wish
to record the changes you have made then press No, the program will close.