Quick Start Guide

ACTIVboard Quick Start Guide
16
On a Macintosh Computer
The following instructions are for Tiger OSX 10.4 only.
Set up the device
a. Click on the Bluetooth Icon in the top menu bar, and select Set
up Bluetooth Device….
b. The Bluetooth Setup Assistant window will open. Click
Continue.
c. A list of devices will be displayed. Select Other Device then
Continue.
d. Your Mac will now search for and list all devices that are in range.
Select ProACTIV.
e. Click Passkey Options. The Passkey Options dialog appears.
f. Select Use Specific Passkey. Click OK.
g. Now position the ACTIVpen over the illuminated flame at the top
right corner of the ACTIVboard. At the same time, hold down the
the barrel button on the ACTIVpen. The illuminated flame will
flash blue for 2 minutes.
h. Return to your computer and click Continue.
i. In the passkey box type 0000.
j. Click Continue. The device is now set up.
k. Click on the red Close button, located in the top left-hand corner
of the window.
l. The illuminated flame on the board will stop flashing and change
to a solid blue. You now have wireless interaction enabled with
Bluetooth Technology.
ACTIVboard Quick Start Guide
16
On a Macintosh Computer
The following instructions are for Tiger OSX 10.4 only.
Set up the device
a. Click on the Bluetooth Icon in the top menu bar, and select Set
up Bluetooth Device….
b. The Bluetooth Setup Assistant window will open. Click
Continue.
c. A list of devices will be displayed. Select Other Device then
Continue.
d. Your Mac will now search for and list all devices that are in range.
Select ProACTIV.
e. Click Passkey Options. The Passkey Options dialog appears.
f. Select Use Specific Passkey. Click OK.
g. Now position the ACTIVpen over the illuminated flame at the top
right corner of the ACTIVboard. At the same time, hold down the
the barrel button on the ACTIVpen. The illuminated flame will
flash blue for 2 minutes.
h. Return to your computer and click Continue.
i. In the passkey box type 0000.
j. Click Continue. The device is now set up.
k. Click on the red Close button, located in the top left-hand corner
of the window.
l. The illuminated flame on the board will stop flashing and change
to a solid blue. You now have wireless interaction enabled with
Bluetooth Technology.