User's Manual

proACTIV board User Guide
4
Installation
Safety Notices
The following precautions must be undertaken before proceeding with any
installation, which involves either fixing to or contact with the fabric of a
building.
Determine the presence of potentially hazardous materials,
e.g. asbestos, before commencing work.
Prior to commencing work, consult the building plans if they are available.
Alternatively, seek professional advice on the potential risk of contact with
hazardous materials. If you suspect hazardous materials are present, the
installation must only be undertaken by specialist contractors.
If hazardous materials are found or suspected after
commencing work, stop the installation immediately and
evacuate the room.
Notify the Health and Safety or Facilities Management officials and seek
specialist advice.
Ensure you are equipped with suitable protective equipment
before commencing work.
Wear a protective mask to prevent inhalation and ingestion if the installation
requires drilling of materials or contact with dust (either in the air or on
surfaces).
Wear suitable eye protection when drilling.
Wear protective gloves in cases where dust is generated and/or insulation
materials are handled.