User Manual

10 ActivExpression 2 Startup Guide
ActivExpression 2
  
The ActivHub enables LRS devices, your computer and other Promethean products to communicate with
each other. Promethean devices are registered on the ActivHub. The ActivHub must be plugged in before
you can use any devices.
Use the 1.8m USB extension cable if necessary.
Devices remember the last ActivHub to which they were registered. If they were last registered to
your ActivHub, you can take the ActivHub to another computer, insert it and use the devices without
registering them again.
Raise the ActivHub
antenna
Insert into USB
port on your
computer
Flashing indicator lights
Red lights up when you first plug in the ActivHub;
at any other time it indicates a problem
Green flashes when data is transmitted or received
  
In new devices the batteries are protected by a small plastic tab. Before you use a device for the first time,
pull the tab out of the device to allow the batteries to connect.
Need picture of a device with tab in place