Datasheet

ActivBoard 387 ProMobile System SS 05-10-V3 UK
Product Specifications
interactive whiteboard system
Page 3
©2010 Promethean Ltd. All Rights Reserved. ActivBoard Mobile System is a trademark of Promethean
Ltd. Any third-party product and company names are mentioned for identification purposes only and may
be trademarks of their respective owners. All dimensions +/- 5mm (0.2in). All weights +/- 2kg (4.5lb).
www.prometheanworld.com Product Specifications are subject to change without notice.
Accommodates ActivBoard 387 Pro
Height-adjustable mount, with 600mm (23.6in) of adjustment from 350mm (13.8in) to 950mm
(37.4in) ± 50mm (1.9”). Top and bottom limit stops are fitted if the full range of movement is
not required/appropriate. Height adjustment is powered by an electrical motor and is operated
using a switch on the side of the stand.
Input Voltage: 24VDC
Max Load: 750N
Static Load: more than 750N
Speed: 30mm/s (no load), 20mm/s (750N)
Stroke Length: 600 ± 2mm
Retracted Length: 795 ± 2mm
End Mounting Dimension: H Type, ø10.1 hole, 6.3mm Slot
Limit Switch: Built-in
Duty Cycle: S2-10min
Temperature: -26˚- 65˚C
IP Degree: IP54
AC-DC Adaptor:
Input Voltage: 100 ~ 240VAC
Output Voltage: 29VDC
Current: 2Amp (4Amp protected)
Cable and Plug: 1.5m, IEC Plug
Aluminium boom arm, extends 740mm (29.1in) from the back of the System. Projector Boom
adjusts with the height of the ActivBoard reducing the need for specific re-calibration following
height adjustment.
1400mm x 740mm (55.1in x 29.1in)
Minimum 2562mm (100.87in) for full range operation
Minimum door height clearance of 1962mm (77.24in) and door width clearance of 775mm
(30.5in). Consideration should also be given to the size of corridors and layout of the school.
See technical drawings
Integrated ‘power management’ system for ActivBoard, Mobile Stand and Projector. There will
be one lead from the Mobile System to plug in to a wall socket.
Frame only (approx.): 100kg (220.5lb); excludes board, projector, cabling and accessories
Complete System Weight (approx.): 140kg (308.5lb) (when ActivBoard 387 Pro is fitted)
Board Size
Height Settings
Actuator Specification
Projector Boom
Mobile Base Dimensions
Room Height Requirements
Door Size Requirements
Minimum Turning Circle Requirement
Power
Weight
mobile stand specifications
ActivBoard Mobile System Requires installation by a certified Promethean installer. Components supplied and minimum
specifications stated have been tested and are required for optimal performance. Use of components
not supplied by Promethean or not meeting minimum specifications may impact performance and
affect warranty. Contact your Promethean partner or visit www.prometheankb.com for more
information. After installation, Promethean recommends that the ActivBoard Mobile System is
moved by 2 people.
install ation
Continued on next page