Operating instructions

ProMinent
®
Page 4
Identcode
Identcode
Please transfer the identity code listed under “Type” on the rating plate into the frame below
TZMb Makro TZ 10 Motor-Driven Metering Pump
Drive type
H Main drive
A Add-on power end
D Double main drive
B Double add-on power end
Pump type: (digits 1 +2 = back pressure [bar], digits 3-6 = feed rate [l/h]
120260 070430 040840
120340 070570 041100
120430 070720 041400
120510 070860 041670
120650 071070 042100 material version PCT/PPT/TTT max. 10 bar
Liquid end material:
PC PVC
PP Polypropylene
SS Stainless steel
TT PTFE + 25% carbon
HC Hastelloy C
Seal material:
T PTFE
Positive displacement element:
1 Standard composite diaphragm with rupture indicator
Liquid end version:
0 No valve springs
1 With valve springs
Hydraulic connection:
0 Standard connection
1 PVC union nut and insert
2 PP union nut and insert
3 PVDF union nut and insert
4 SS union nut and insert
Version:
0 with ProMinent
®
logo
2 No ProMinent
®
logo
A0 with ProMinent
®
logo, with frame, simplex
B0 with ProMinent
®
logo, with frame, duplex
C0 with ProMinent
®
logo, with frame, triplex
M Modified
Electrical power supply:
S3 ph. 230/400 V 50/60 Hz (dual wound)
P3 ph. 265/460 V 60 Hz (Exe, Exde)
L3 ph. 230/400 V 50 Hz (Exe, Exde)
N1 ph, 115 V 60 Hz
RVariable speed motor4 pole230/400 V
VVariable speed motor with integr.speed changer
Z Speed control kit
4 No motor, with 56 C flange
7 No motor, with 120/80 flange
8 No motor, with 160/90 flange
9 No motor, with 200/90 flange
Enclosure rating:
0 IP 55 (Standard) ISO class F
1 Exe version ATEX-T3
2 Exde version ATEX-T4
AATEX power end
Stroke sensor:
0 No stroke sensor
1 With stroke sensor (Namur)
Stroke length adjustment:
00 Stroke length adjustment, man.
1 230 V stroke actuator
2 115 V stroke actuator
3 230 V 0-20 mA stroke controller
4 230 V 4-20 mA stroke controller
5 115 V 0-20 mA stroke controller
6 115 V 4-20 mA stroke controller
Applications:
0 Standard
TZMb
–– –– –– –– –– –– –– –– –– –– –– –– ––
BA_MA_TZ_006_10_06_GB.p65 05.02.2007, 13:41 Uhr4