Operating instructions

ProMinent
®
Page 46
Technical data
Makro TZ (TZMa) motor data table
Identity Code Supply Remarks
special feature
S3 ph, IP 55 220-240 V/380-420 V 50 Hz 0.75 kW
250-280 V/440-480 V 60 Hz 0.75 kW
L1 3 ph, II2GEEXeIIT3 220-240 V/380-420 V 50 Hz 0.75 kW
L2 3 ph, II2GEEXdIICT4 220-240 V/380-420 V 50 Hz 0.75 kW with PTC thermistor, speed control range 1:5
P1 3 ph, II2GEEXeIIT3 250-280 V/440-480 V 60 Hz 0.75 kW
P2 3 ph, II2GEEXdIICT4 250-280 V/440-480 V 60 Hz 0.75 kW with PTC thermistor, speed control range 1:5
R3 ph, IP 55 230 V/400 V 50/60 Hz 1.5 kW with PTC thermistor, speed control range 1:20
with external fan 1ph 230 V; 50/60 Hz
V0 3 ph, IP 55 400 V ±10 % 50/60 Hz 1.5 kW variable-speed motor with integrated
frequency converter
V2 3 ph, II2GEExdIICT4 400 V ±10 % 50/60 Hz 1.5 kW Ex-variable-speed motor with integrated
frequency converter
Please request motor data sheets for more information.
Special motors and motor flanges are possible on request.
Table of main pumps diaphragm liquid ends (TZMa)
with 1500 rpm motor at 50 Hz with 1800 rpm motor at 60 Hz
Capacity Max. Capacity Stroke Suction Connection Shipping
at max. stroke at max. count at lift suction/ weight
back pressure frequency back pressure max. back discharge
pressure side
Pump type bar l/h ml/ strokes/ psi l/h/gph strokes/ m WG G-DN kg
TZMa stroke min. min.
120190 12 190 44 72 174 228/ 60 86 5 1 1/4 - 20 53
120254 12 254 44 96 174 304/ 80 115 5 1 1/4 - 20 53
120317 12 317 44 120 174 381/100 144 5 1 1/4 - 20 53
120381 12 381 44 144 174 457/120 173 5 1 1/4 - 20 53
060397 6 397 91.8 72 87 476/125 86 4 1 1/2 - 25 48
060529 6 529 91.8 96 87 634/167 115 4 1 1/2 - 25 48
060661 6 661 91.8 120 87 793/209 144 4 1 1/2 - 25 48
060793 6 793 91.8 144 87 952/251 173 4 1 1/2 - 25 48
030750 3 750 173.6 72 44 900/237 86 2.5 2 1/4 - 40 62
031000 3 1000 173.6 96 44 1200/317 115 2.5 2 1/4 - 40 62
031250 3 1250 173.6 120 44 1500/396 144 2.5 2 1/4 - 40 62
031500 3 1500 173.6 144 44 1800/475 173 2.5 2 1/4 - 40 62
031875 3 1875 173.6 180 44 – / – – 2.5 2 1/4 - 40 62
031050 3 1050 240.0 73 44 1250/330 87 3 2 1/4 - 40 62
031395 3 1395 240.0 97 44 1685/445 117 3 2 1/4 - 40 62
031740 3 1740 240.0 121 44 2100/555 146 3 2 1/4 - 40 62
032100 3 2100 240.0 146 44 2490/658 173 3 2 1/4 - 40 62
032500 3 2500 240.0 180 44 – / – – 3 2 1/4 - 40 87
Material version PPE/PCA/TTT 10 bar max.
The permissible priming pressure on the suction side is approx. 50 % of the max. permissible back pressure.
All figures apply for water at 20 °C.
The suction lift applies for filled suction line and liquid end - with correct installation.
The priming lift of 2 m applies for clean and wetted valves and free discharge
(the values reduce with valve springs!).
BA_MA_TZ_006_10_06_GB.p65 05.02.2007, 13:41 Uhr46