Operating instructions

ProMinent
®
Page 51
Piston liquid ends
Material long term at max. back pressure
(TZKa)
Stainless steel 150 °C
Technical data
Environmental conditions
Storage temperature -10 °C to 50 °C
Ambient temperature -10 °C to 45 °C
Humidity: 95 % rel. humidity, non-condensing
Maximum feed chemical temperatures for liquid ends:
Diaphragm liquid ends
(TZMb, TZMa and TZHa)
Material long term at short term at
max back pressure. max. 2 bar (15 min)
PC 45 °C 60 °C
PP 60 °C 100 °C
PTFE 90 °C 120 °C
Stainless steel 90 °C 120 °C
Transmission oil
Gear oil Mobilgear 634 VG 460. Order no. 1004542 (1 l oil canister).
Required oil quantity: 3.5 l
Hydraulic oil
Hydraulic oil Mobiloil DTE 11. Order no. 555332. (1 l oil canister)
Required oil quantity:
Diaphragm replacement Oil change kit
TZHa approx. 0.65 l approx. 2.6 l
Compatibility
The hydraulic accessories for the Makro TZ metering pump are compatible with those for the
piston pumps Sigma and Makro/ 5.
Spare parts
Type TZMb Spare parts kits Makro TZ (TZMb)
The spare parts kit generally contains all the liquid end parts subject to wear
1 pump diaphragm
1 suction valve set
1 discharge valve set
2 valve balls (DN 40 with plate and spring
1 set of seals (O-rings and flat seal, valve seats, valve seat bushes
Order No.
Identcode: 120260, 120340, 120430, 120510, 120650
Liquid end FM 650 - DN 25 PP 1025166
P 1025164
T 1025172
S 1022896
S (without valve set) 1022895
Identcode: 070430, 070570, 070720, 070860, 071070
Liquid end FM 1070 - DN 32 PP 1025168
P 1025167
T 1025173
S 1022917
S (without valve set) 1022916
BA_MA_TZ_006_10_06_GB.p65 05.02.2007, 13:41 Uhr51