Operating instructions

ProMinent
®
Page 6
Identcode
Identcode
Please transfer the identity code listed under “Type” on the rating plate into the frame below
* order-related version,
refer to purchase
order paperwork for
pump characteristics
TZHa Makro TZ 20 Hydraulic Diaphragm Pump
Drive type:
H Main drive B Double add-on power end
D Double main drive A Add-on power end
Pump type:
160300 160500 100502
160400 160600 100669
160750 100836
101004
101204 material version PCA/PPE/TTT max. 10 bar
Liquid end material:
PC PVC
PP Polypropylene
SS Stainless steel
TT PTFE + 25% carbon
Seal material:
A FPM
E EPDM
T PTFE seal
Positive displacement element:
T PTFE coating composite diaphragm, with rupture indicator
Liquid end version:
0 No valve springs
1 With valve springs
Hydraulic connection:
0 Standard connection
1 PVC union nut and insert
2 PPP union nut and insert
3 PVDF union nut and insert
4 SS union nut and insert
Version:
0 With ProMinent
®
logo, no frame
2 No ProMinent
®
logo, no frame
A With ProMinent
®
-Logo, with frame, simplex
B With ProMinent
®
logo, with frame, duplex
C With ProMinent
®
logo, with frame, triplex
M Modified*
Electrical power supply:
S3 ph. 230/400 V 50/60 Hz (dual wound)
P3 ph. 230/400 V 60 Hz (Exe, Exde)
L3 ph. 230/400 V 50 Hz (Exe, Exde)
RVariable speed motor 4 pole 230/400 V
VVariable speed motor with integr. speed control
1 ph, 230 V, 50/60 Hz
Z variable speed control set 230/400 V
4 No motor, with 56 C flange
7 No motor, with 120/80 flange
8 No motor, with 160/90 flange
9 No motor, with 200/90 flange
Enclosure rating:
0 IP 55 (Standard) ISO class F
1 Exe version ATEX-T3
2 Exde version ATEX-T4
AATEX power end
Stroke sensor:
0 No stroke sensor
1 With stroke sensor (Namur)
Stroke length adjustment:
0 Stroke length adjustment, man.
1 230 V stroke actuator
2 115 V stroke actuator
3 230 V 0-20 mA stroke controller
4 230 V 4-20 mA stroke controller
5 115 V 0-20 mA stroke controller
6 115 V 4-20 mA stroke controller
Applications:
0 Standard
2 Low temperature to -25 °C
TZHa
–– –– –– –– –– –– –– –– –– –– –– –– ––
FPM = Fluorine rubber
BA_MA_TZ_006_10_06_GB.p65 05.02.2007, 13:41 Uhr6