User manual

Chapter 3: Installing Software Drivers

Existing Windows XP Installation

After installing the SATA150 TX Series card and rebooting your system,

Windows XP setup will show a “Found New Hardware” dialog box. Under

Windows XP, “RAID Controller” will be displayed.

1. Insert the SATA150 TX Series driver diskette into the A:\ drive.

2. Choose Install the software automatically and press the Enter key.

3. Choose WinXP Promise SATA150 TX Series Controller from the list that

appears on screen, and then press the Enter key.

4. If using a driver that has not been digitally signed by Microsoft, you will be

asked if you want to continue the installation. Click Continue.

5. When the New Hardware Wizard has finished installing the SATA150 TX

Series software, click Finish.

Confirming Windows XP Driver Installation

1. Right-click the My Computer icon and select Manage from the popup menu.

2. Click Device Manager in the menu tree.

3. Click the “+” in front of SCSI controllers. WinXP Promise SATA150 TX

Series Controller should appear.