User manual

Chapter 3: Installing Software Drivers

Existing Windows 2000

After installing the SATA150 TX Series card and rebooting your system,

Windows 2000 setup will show a “New Hardware Found” dialog box. Under

Windows 2000, “RAID Controller” will be displayed.

1. Insert the SATA150 TX Series driver diskette in drive A:\.

2. Choose Search for a suitable driver for my device (Recommended) from the

list, then click Next.

3. Choose Floppy disk drives from the list, then click Next. The Hardware

Wizard will search the diskette for updates and return the following

message:

“Windows found a driver for this device. A:\Win2000\fasttx2k.inf. To install

the driver Windows found, click Next.”

4. Click Next. The Found New Hardware Wizard appears when the installation

is complete.

5. Remove the diskette and click Finish to restart the system. Windows 2000

will then restart for the driver installation to take effect.

Confirming Windows 2000 Driver Installation

1. Right-click the My Computer icon and select Manage from the popup menu.

2. Click Device Manager in the menu tree.

3. Click the “+” in front of SCSI controllers. Win2000 Promise SATA150 TX

Series Controller should appear.