Product manual

Chapter 4: Management with WebPAM PROe
105
4. Click the Confirm button.
To start the SSH service after stopping it:
1. Click the AdminTool tab.
2. Click the Services icon.
3. Mouse-over the SSH service and click the Start button.
Restarting SSH Service
To restart the SSH service:
1. Click the AdminTool tab.
2. Click the Services icon.
3. Mouse-over the SSH service and click the Restart button.
Making SSH Settings
To change SSH service settings:
1. Click the AdminTool tab.
2. Click the Services icon.
3. Mouse-over the SSH service and click the Settings button.
4. Make settings changes as required:
• Choose a startup type,
• Automatic – (default) Starts and runs with the subsystem.
• Manual – You start the service when you need it.
• Port number - Default is 22.
• Max Number of Concurrent Connections – Default is 4.
Maximum number is 4.
• Session Time Out - Default is 24 minutes.
5. Click the Save button.
6. Click the Confirm button.
SNMP Service
Simple Network Management Protocol (SNMP) service enables the SNMP
browser to obtain information from the RAID subsystem. The Trap Sink is where
SNMP events are sent and can be viewed.
Stopping SNMP Service
To stop the SNMP service:
1. Click the AdminTool tab.
2. Click the Services icon.
3. Mouse-over the SNMP service and click the Stop button.