Product manual

Chapter 4: Management with WebPAM PROe
119
5. Click the Save Advanced SMART Log button.
Your browser saves a text file containing the SMART Log to its designated
download folder.
Locating a Physical Drive
This feature causes the drive carrier LEDs to blink for one minute to assist you in
locating the physical drive, and is supported by RAID subsystems and JBOD
expansion units.
To locate a physical drive:
1. Click the Device tab.
2. Click the Physical Drive icon.
3. Mouse-over the physical drive you want and click the Locate button.
The drive carrier LED flashes for one minute.
Forcing a Physical Drive Offline
This feature applies only to physical drives assigned to disk arrays.
To force a physical drive offline:
1. Click the Device tab.
2. Click the Physical Drive icon.
3. Click the down arrow button to list the physical drives in the enclosure.
4. Mouse over the physical drive you want to force offline.
Caution
Forcing a physical drive offline or online is likely to cause data
loss. Back up your data before you proceed. Use these functions
only when required.
Important
Forcing a physical drive offline causes your logical drives to
become degraded. If Auto Rebuild is enabled and a spare drive is
available, the disk array begins rebuilding itself automatically.
Green LED
flashes