Product manual

VTrak E-Class Product Manual
122
The list of disk arrays appears.
3. Mouse-over the disk array you want and click the View button.
Array information displays, including:
ID – DA0, DA1, DA2, etc.
Alias – If assigned
Operational Status – OK is normal
Media Patrol – Enabled or disabled on this array
PDM – Enabled or disabled on this array
Total Capacity – Data capacity of the array
Configurable Capacity – Maximum usable capacity of the array
Free Capacity –Unconfigured or unused capacity on the physical drives
Number of Physical Drives – The number of physical drives in this
array
Number of Logical Drives – The number of logical drives on this array
Max Contiguous Free Capacity – Unconfigured or unused capacity in
contiguous sectors on the physical drives
Available RAID Levels – RAID levels you can specify on this array
Creating a Disk Array Manually
This feature creates a disk array only. You can also use the Wizard to create a
disk array with logical drives and spare drives at the same time.
This action requires Super User or Power User privileges.
To create a disk array:
1. Click the Storage tab.
2. Click the Disk Array icon.
3. Click the Create Disk Array button.
4. Accept the defaults or make changes:
Enter an alias in the Alias field
Maximum of 32 characters; letters, numbers, space between
characters, and underline.
Media Patrol – Uncheck to disable on this array.
For more information, see “Media Patrol” on page 259.
PDM – Uncheck to disable on this array.
For more information, see “PDM” on page 259.
Power management – Uncheck to disable on this array.