Product manual

Chapter 4: Management with WebPAM PROe
127
If there is capacity remaining, you can create an additional logical drive.
3. Click the Next button to continue.
The Create Spare Drive screen displays.
Task 3 – Spare Drive Creation
To create your spare drive:
1. For each of the following items, accept the default or change the settings as
required:
• Check the Revertible box if you want a revertible spare drive.
A revertible spare drive returns to its spare drive assignment after you
replace the failed physical drive in the disk array and run the Transition
function.
• Global – Can be used by any disk array
• Dedicated to newly created disk array – The disk array you are now
creating.
2. In the Select Physical Drives diagram, click a drive to choose it for your
spare.
The ID number for chosen drive appears in the field below the diagram.
3. Click the Next button.
The Summary screen displays.
Task 4 – Summary
Review your choices of disk array, logical drives, and spare drive.
• To make a change, click the Back button to reach the appropriate screen.
• To accept, click the Submit button.
Click the Finish button to clear the Summary screen.
Deleting a Disk Array
This action requires Administrator or Super User privileges.
To delete a disk array:
1. Click the Storage tab.
2. Click the Disk Array icon.
Caution
If you delete a disk array, you also delete any logical drives that
belong to it, along with the data in those logical drives. Back up
any important data before deleting a disk array.