Product manual

VTrak E-Class Product Manual
128
3. Mouse-over the disk array you want and click the Delete button.
4. In the Confirmation box, type the word “confirm” in the field provided and
click the Confirm button.
Making Disk Array Settings
To make disk array settings:
1. Click the Storage tab.
2. Click the Disk Array icon.
The list of disk arrays appears.
3. Mouse-over the disk array you want and click the Settings button.
4. Make setting changes as required:
• Enter, change or delete the alias in the Alias field
Maximum of 32 characters; letters, numbers, space between
characters, and underline.
• Media Patrol – Check to enable, uncheck to disable on this array.
• PDM – Check to enable, uncheck to disable on this array.
• Power Management – Check to enable, uncheck to disable on this
array.
5. Click the Save button.
Locating a Disk Array
This feature causes the drive carrier LEDs to flash for one minute to assist you in
locating the physical drives that make up this disk array.
To locate a disk array:
1. Click the Storage tab.
Note
You can also enable or disable Media Patrol for the entire RAID
system. See “Making Media Patrol Settings” on page 94.
Notes
• HDD Power Saving must be enabled on the RAID controller
for the Power Management settings to be effective. See
“Making Controller Settings” on page 70.
• Power Management functions are limited to the features your
HDDs actually support.