Product manual

VTrak E-Class Product Manual
130
2. Click the Background Activities icon.
The list of background activities appears.
3. Mouse-over PDM and click the Start button.
4. From the Source Physical Drive dropdown menu, choose a Source disk
array and physical drive.
5. From the Target Physical Drive dropdown menu, choose a Target physical
drive.
6. Click the Confirm button.
Stopping, Pausing or Resuming PDM
To stop, pause or resume PDM:
1. Click the AdminTool tab.
2. Click the Background Activities icon.
The list of background activities appears.
3. Mouse-over PDM and click the Stop, Pause, or Resume button.
You can also enable or disable PDM on individual disk arrays. See “Making Disk
Array Settings” on page 128.
Preparing a Disk Array for Transport
This feature prepares the physical drives that make up the disk array to be
removed from the enclosure and installed in a different location.
To prepare a disk array for transport:
1. Click the Storage tab.
2. Click the Disk Array icon.
The list of disk arrays appears.
3. Mouse-over the disk array you want and click the Transport button.
4. Click the Confirm button.
The status changes to Transport Ready.
5. Remove the physical drives and install them in their new location.
See the “Installing Physical Drives” on page 19 for more information.
Rebuilding a Disk Array
When you rebuild a disk array, you are actually rebuilding the data on one
physical drive.
If there is no spare drive of adequate capacity and the Auto Rebuild function is
DISABLED, you must replace the failed drive with an unconfigured physical