Product manual

Chapter 4: Management with WebPAM PROe
131
drive, then perform a Manual Rebuild. See “Making Rebuild Settings” on
page 96
Performing a Manual Rebuild
To perform a manual rebuild:
1. Click the AdminTool tab.
2. Click the Background Activities icon.
The list of background activities appears.
3. Mouse-over Rebuild and click the Start button.
4. From the Source Physical Drive dropdown menu, choose a Source disk
array and physical drive.
Arrays have an ID No. Physical drives have a Seq. No.(sequence number)
5. From the Target Physical Drive dropdown menu, choose a Target physical
drive.
6. Click the Confirm button.
Stopping, Pausing or Resuming a Rebuild
To stop, pause or resume a Rebuild:
1. Click the AdminTool tab.
2. Click the Background Activities icon.
The list of background appears.
3. Mouse-over Rebuild and click the Stop, Pause, or Resume button.
Important
If your replacement disk drive was formerly part of a different disk
array or logical drive, you must clear the configuration data on the
replacement drive before you use it. See “Clearing a Stale or a
PFA Condition” on page 120.