Product manual
VTrak E-Class Product Manual
132
Managing Logical Drives
Logical drive management includes:
• Viewing a List of Logical Drives (below)
• Viewing Logical Drive Information (page 132)
• Viewing Logical Drive Statistics (page 133)
• Viewing Logical Drive Check Tables (page 134)
• Creating a Logical Drive Manually (page 135)
• Deleting a Logical Drive (page 136)
• Making Logical Drive Settings (page 136)
• Locating a Logical Drive (page 137)
• Locating a Logical Drive (page 137)
• Initializing a Logical Drive (page 137)
• Redundancy Check on a Logical Drive (page 138)
• Migrating a Logical Drive’s RAID Level (page 139)
Also see Disk Array and Logical Drive Problems (page 317).
Viewing a List of Logical Drives
To view a list of logical drives:
1. Click the Storage tab.
2. Click the Logical Drive icon.
The list of logical drives appears.
Logical Drive information includes:
• ID – LD0, LD1, LD2, etc.
• Alias – If assigned.
• Status – A green check icon means OK.
• Capacity – Data capacity of the logical drive.
• RAID Level – Set when the logical drive was created.
• Stripe – Set when the logical drive was created.
• Cache Policy – Read cache and Write cache settings.
• Array ID – ID number of the disk array where this logical drive was
created.
Viewing Logical Drive Information
To view logical drive information:
1. Click the Storage tab.