Product manual

VTrak E-Class Product Manual
152
• Controller ID
• Connector type
• Transceiver type
• Transceiver code
• Vendor name
Adding an FC Initiator
You must add an initiator to the VTrak’s initiator list in order to use the initiator to
create a LUN for your logical drive.
To add a Fibre Channel initiator from a list:
1. Click the Device tab.
2. Click the FC Management icon.
3. Click the Initiators on Fabric tab.
4. Check the box to the left of the initiator you want to add.
5. Click the Add to Initiator List button.
The initiator is added, and its check box grays out.
Deleting an FC Initiator
This action requires Administrator or Super User privileges.
To delete an initiator:
1. Click the AdminTool tab.
2. Click the Initiator icon.
3. Mouse-over the initiator you want and click the Delete button.
4. In the Confirmation box, type the word “confirm” in the field provided and
click the Confirm button.
The initiator is removed from VTrak’s initiator list.
Caution
If you delete an initiator, you delete the LUN associated with that
initiator. Verify that the LUN is no longer needed before deleting
the initiator.