Product manual

VTrak E-Class Product Manual
156
Initial Connection
Making an initial connection includes the following functions:
• Making a Serial Connection (page 156)
• Making a Telnet Connection (page 157)
• Making a SSH Connection (page 157)
• Logging Into the CLI (page 158)
• Accessing Online Help (page 159)
• Exiting the CLU (page 159)
• Logging Out of the CLI (page 160)
• Logging Back Into the CLI and CLU (page 160)
Making a Serial Connection
Before you begin, be sure the RJ11-to-DB9 serial data cable is connected
between the Host PC and VTrak, and that both machines are booted and
running.
Figure 1. Serial port on the controller
Then do the following actions:
1. Change your terminal emulation program settings to match the following
specifications:
• Bits per second: 115200
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: none
2. Start your PC’s terminal VT100 or ANSI emulation program.
3. Press Enter once to launch the CLI.
Serial port