Product manual

VTrak E-Class Product Manual
158
The IP address above is only an example.
Use the Management port IP address of your VTrak.
The SSH default port number is 22.
3. Press Enter once to launch the CLI.
Logging Into the CLI
1. At the Login prompt, type the user name and press Enter.
The default user name is administrator.
2. At the Password prompt, type the password and press Enter.
The default password is password.
The CLI screen appears.
3. At the administrator@cli> prompt, type menu and press Enter.
The CLU Main Menu appears.
Figure 4. CLU main menu
Quick Setup – A sequence of four steps to setup system date and time,
Management port, and RAID configuration.
Subsystem Management – Subsystem settings, Controller settings, statistics,
lock/unlock the subsystem, set date and time, Enclosure settings, FRUs and
Topology.