Product manual

VTrak E-Class Product Manual
164
3. Highlight the System Date or System Time setting.
4. Press the backspace key to erase the current value.
5. Type in a new value.
6. Press Ctrl-A to save your settings.
Making NTP Settings
After you have made Network Time Protocol (NTP) settings, the VTrak
subsystem synchronizes with a NTP server.
• At startup
• Every night
• When you synchronize manually
To make NTP settings for the subsystem:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight NTP Management and press Enter.
3. Highlight NTP Settings and press Enter.
4. Make the following settings as required:
• Highlight NTP Service and press the spacebar to toggle between
Enabled and Disabled.
• Highlight Time Server (1), Time Server (2), or Time Server (3) and
type a server name.
Example: 0.us.pool.ntp.org
You can have up to 3 NTP servers.
• Highlight Time Zone and press the spacebar to toggle through GMT,
GMT+, and GMT-.
For GMT+ and GMT-, type the hour from 0:00 to 13:00 GMT for your
time zone.
• Highlight Daylight Savings Time and press the spacebar to toggle
between Enable and Disable.
If Daylight Savings Time is Enabled, highlight the Start Month and End
Month and enter a number from 1 to 12.
Then highlight the Week and Day and toggle to make your choices.
5. Press Ctrl-A to save your settings.
Notes
• The NTP server name shown is an example only. You must
find and enter your local NTP server name.
• GMT is the older designation for UTC.