Product manual

Chapter 5: Management with the CLU
171
Adjustable items
You can set or adjust the following items:
Enclosure Warning and Critical temperature thresholds
Controller Warning and Critical temperature thresholds
See “Making Enclosure Settings” below.
For information on Enclosure problems, see “Enclosure Problems” on page 308.
Making Enclosure Settings
To make Enclosure settings:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
3. Highlight the enclosure you want and press Enter.
4. Highlight Enclosure Settings and press Enter.
5. Highlight the Temperature Warning threshold you want to change.
6. Press the backspace key to erase the current value.
7. Type a new interval value in degrees C.
8. Press Ctrl-A to save your settings.
Viewing FRU VPD Information
FRU VPD refers to Vital Product Data (VPD) information about Field Replaceable
Units (FRU) in the enclosure. The number and type of FRU depends on the
subsystem model.
To view FRU VPD information:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
3. Highlight the enclosure you want and press Enter.
4. Highlight FRU VPD Information and press Enter.
Use this information when communicating with Technical Support and when
ordering replacement units. For contact information, see “Contacting
Technical Support” on page 351.
Viewing Power Supply Status
To view the status of the power supplies:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.