Product manual

Chapter 6: Maintenance
251
E330f
Removing the Old Power Supply
To remove the power supply:
1. Verify that the status LED is amber or red. See Figure 3.
2. Switch off the power.
3. Unplug the power cord.
4. Turn the set screw counter-clockwise to loosen it.
The screw is are retained on the handle.
5. Grasp the handle and swing it out and to the right.
6. Pull the power supply out of the enclosure.
Figure 3. Power supply for VTrak E330f
Installing a New Power Supply
To install the power supply:
1. Carefully slide the power supply into the enclosure.
2. Press the handle in to secure the power supply.
3. Turn the set screw clockwise to tighten it.
4. Plug in the power cord.
5. Switch on the power supply.
6. Verify that the new power supply status LED is green. See Figure 3.
Status LED
On/Off switchSet screwHandle