Product manual

Chapter 6: Maintenance
257
Installing the New Controller
To install the new RAID controller:
1. Carefully slide the RAID controller into the enclosure.
2. Gently swing the handle in and press the handle until it locks.
3. Reconnect all cables that were attached to the RAID controller,
• Fibre Channel cables
• SAS cable
• Ethernet (management) cables
• Serial cable
• USB cable
• UPS control cable
4. Turn on the power supply switches.
The VTrak restarts. For more information about VTrak’s start-up behavior,
see “Connecting the Power” on page 33.
5. Log into the VTrak.
For more information, see “Logging into WebPAM PROe” on page 51 or
“Initial Connection” on page 156.