Product manual

293
Chapter 8: Troubleshooting
This chapter contains the following topics:
• VTrak is Beeping (below)
• LEDs Display Amber or Red (page 295)
• CLU Reports a Problem (page 300)
• WebPAM PROe Reports a Problem (page 303)
• USB Support Reports a Problem (page 307)
• Enclosure Problems (page 308)
• Controller Problems (page 312)
• Disk Array and Logical Drive Problems (page 317)
• Physical Drive Problems (page 316)
• Connection Problems (page 322)
• Power Cycling the Subsystem (page 326)
• Event Notification Response (page 327)
VTrak is Beeping
VTrak’s alarm has five different patterns, as shown below.
Figure 1. Audible alarm sound patters
When you first power-up the VTrak, it beeps twice to show normal operation.
The audible alarm sounds at other times to inform you that the VTrak needs
attention. But the alarm does not specify the condition.
When the alarm sounds:
• Check the front and back of VTrak enclosure for red or amber LEDs.
• If email notification is enabled, check for new messages.
.25s.25s.25s
.25s.25s
.25s.25s
.25s.25s .25s
.25s
.25s
.5s
.25s
.5s
.75s
.25s
.75s
.25s
.75s
1s 1.25s
2.5s
3s
1x
2x
1
2
3
4
5
6s
s
8