Product manual

Chapter 8: Troubleshooting
333
Fibre Channel link is up
No action is required.
Fibre Channel link is down
Fibre Channel controller settings have
changed
Firmware Update
Firmware update is started
No action is required.
Firmware update is complete
Firmware update is fail Try the update again. If this message
repeats, contact Tech Support.
Back-end expander firmware upgrade
is started
No action is required.
Back-end expander firmware upgrade
is completed
Back-end expander firmware upgrade
failed
Try the update again. If this message
repeats, contact Tech Support.
Front-end expander firmware upgrade
is started
No action is required.
Front-end expander firmware upgrade
is completed
Front-end expander firmware upgrade
failed
Try the update again. If this message
repeats, contact Tech Support.
Host Interface
Host interface controller has detected
bus reset
If this message appears repeatedly,
contact Tech Support.
Host interface controller has
encountered an unrecoverable error
Restart the VTrak. If this message
appears repeatedly, contact Tech
Support.
Host interface controller has received
an “abort task” command.
No action is required.
Host interface controller has received
an “abort task set” command.
Host interface controller has received a
“clear ACA” command.
If this message appears repeatedly,
contact Tech Support.
Reported Event Corrective Action