Product manual

VTrak E-Class Product Manual
334
Host interface controller has received a
“clear task set” command.
No action is required.
Host interface controller has received a
“LUN reset” command.
Host interface controller is informed that
the initiator has detected an error
If this message appears repeatedly,
contact Tech Support.
Host interface controller has received
illegal secondary identification
Host interface controller has received a
message parity error
Host interface controller has received a
bus reboot
Host interface link is up No action is required.
Host interface link is down Check connections.
Host interface controller has
encountered an unknown error
If this message appears repeatedly,
contact Tech Support.
Host interface controller has
encountered a system error
Host interface controller has
encountered a fatal error
Restart the VTrak. If this message
appears repeatedly, contact Tech
Support.
Host interface controller settings have
changed
No action is required.
Host interface controller has received a
‘WARM reset’ command
If this message appears repeatedly,
contact Tech Support.
Host interface controller has received a
“COLD reset” command
Host Interface controller, MU
handshake failed
Host Interface controller, HMU has
stopped
Host Interface controller, FMU has
unloaded
Initiator
Initiator sent message for detecting an
error
If this message appears repeatedly,
contact Tech Support.
Reported Event Corrective Action