Product manual

Chapter 8: Troubleshooting
337
Online capacity expansion has
resumed
No action is required.
Online capacity expansion has stopped If this action was not intentional, check
the logical drive’s status.
Online capacity expansion has
encountered a physical disk error
Check the physical drive check table
after OCE is finished.
Online capacity expansion is aborted
due to an internal error.
Reduce system load on the VTrak.
Online capacity expansion is queued No action is required.
Parity
Parity error is detected during Data Out
phase
If this message appears repeatedly,
contact Tech Support.
PDM
PDM is started
No action is required.PDM is in progress
PDM is completed
PDM is paused Resume PDM when ready.
PDM is resumed No action is required.
PDM is stopped If this action was not intentional, check
the disk array’s status.
PDM is switched to rebuild. Replace the dead physical drive or
reinstall the missing drive.
PDM is stopped internally The destination drive was removed or
used for a rebuild.
Physical Disk (Physical Drive)
Physical disk is marked online No action is required.
Physical disk is marked offline
Replace the physical drive.Physical disk is marked as DEAD.
Physical disk has been reset
Reported Event Corrective Action