Product manual

VTrak E-Class Product Manual
342
Redundancy Check task is stopped
internally
Restore the disk array to functional
status.
Redundancy check is started on
unsynchronized logical drive
No action is required.
Resource
Resource is NOT available Reduce system load on the VTrak.
SCSI
SCSI host interface controller settings
have changed
No action is required.
SEP
SEP is found No action is required.
SEP is NOT found Insert or replace SEP hardware.
SEP I2C device access failure
If this message appears repeatedly,
contact Tech Support.
SEP I2C device access recovered from
failure
Spare Check
Spare check started on the given spare
drive
No action is required.
Spare check completed successfully on
the given spare drive
Spare Drives
Physical disk assigned as global spare
No action is required.
Physical disk is no longer assigned as
global spare
Global Spare has been deleted
Physical disk assigned as dedicated
spare
Physical disk is no longer assigned as
dedicated spare
Dedicated Spare has been deleted
SMART
SMART error is received If this message appears repeatedly,
replace the physical drive.
Reported Event Corrective Action