Product manual

Chapter 8: Troubleshooting
343
Stripe Level Migration
Stripe Level migration is started
No action is required.
Stripe Level migration is completed
Stripe Level migration is paused Resume SLM when ready.
Stripe Level migration is resumed No action is required.
Stripe Level migration is stopped If this action was not intentional, check
the logical drive’s status.
Stripe Level migration has encountered
a physical disk error
Check the physical drive check table
after OCE is finished.
Stripe Level migration is aborted due to
an internal error.
Reduce system load on the VTrak.
Stripe Level migration is queued No action is required.
Synchronization
Synchronization is started No action is required.
Synchronization is completed No action is required.
Synchronization is paused Resume synchronization when ready.
Synchronization is resumed
No action is required.
Synchronization is stopped
Synchronization is aborted due to an
internal error.
Reduce system load on the VTrak.
Synchronization is queued
No action is required.
Synchronization is stopped internally
Subsystem (VTrak)
The Subsystem is started
No action is required.
The Subsystem is stopped
Subsystem parameter(s) are changed
by user
System is set to Redundant mode
System is set to Critical mode Check controller operation.
System is set to Non-Redundant mode If your system has two controllers,
check controller operation.
Reported Event Corrective Action