Product manual

VTrak E-Class Product Manual
20
Figure 7. VTrak E630f/s drive slot numbering
Figure 8. VTrak E330f/s drive slot numbering
Install all of the drive carriers into the VTrak enclosure to ensure proper airflow,
even if you do not populate all the carriers with physical drives.
Installing Your Drives
The VTrak drive carrier accommodates 2.5-inch and 3.5-inch drives, with or
without a SAS-to-SATA adapter.
1. Press the drive carrier release button.
The handle springs open.
2. Grasp the handle and gently pull the empty drive carrier out of the enclosure.
Cautions
Swing open the drive carrier handle before you insert the
drive carrier into the enclosure.
To avoid hand contact with an electrical hazard, remove only
one drive carrier a time.
Important
SATA drives require a SAS-to-SATA adapter, available from
PROMISE Technology at http://www.promise.com
SAS drives do not require adapters.
1
5
9
13
2
6
10
14
3
7
11
15
4
8
12
16
1
5
9
2
6
10
3
7
11
4
8
12