Product manual

Installing Physical Drives
21
Figure 9. Drive carrier front view
3. If you are installing SATA drives, attach a SAS-to-SATA adapter onto the
power and data connectors of each drive.
4. Carefully lay the drive into the carrier with the power and data connectors
facing away from the carrier handle.
5. Position the drive in the carrier so the mounting holes line up.
• 2.5-inch drive mounting screws go through the bottom of the carrier.
• SAS-to-SATA adapter mounting screws go through the bottom of the
carrier.
• 3.5-inch drive mounting screws go through the sides of the carrier.
Figure 10.Drive carrier bottom view
Release
button
Handle
SAS-to-SATA adapter mounting holes (total of 2)
2.5-inch SAS drive mounting holes (total of 4)
2.5-inch SATA drive mounting holes (total of 4)
drive carrier handle