Product manual

Chapter 3: Setup
39
administrator@cli> net -m
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
CtrlId: 1 Port: 1
Type: Management Ethernet IPType: IPv4
IP: 192.168.10.101 IPMask: 255.255.255.0
MAC: 00:01:55:AE:02:AE DNS: 0.0.0.0
Gateway: 192.168.10.1 DHCP: Disabled
This completes the Management port setup. Go to “Logging into WebPAM
PROe” on page 42.
To see the full set of CLI commands, at the admin@cli> prompt, type help and
press Enter.
Setting up VTrak with the CLU
1. At the administrator@cli> prompt, type menu and press Enter.
The CLU main menu appears.
Figure 3. CLU main menu
2. Highlight Quick Setup and press Enter.
The first Quick Setup screen enables you to make Date and Time settings.